Advertisement
Home Improvement

5 WAYS TO PREVENT MOLD DEVELOPMENT ON YOUR HOME AIR CONDITIONER

Vaibhav Rai

September 13, 2018 03:06 PM

Getting through the summer season without an air conditioner is unimaginable. That is why, in Southern cities like New Orleans and Tampa, regular AC service is a must to avoid unexpected system malfunctions and breakdowns. However, some AC issues stay undetectable as they have no bearing on the performance of the unit. The worst part is, by the time you realize you have a problem, it’s too late. That’s the case with mold. Most homeowners don’t associate mold with air conditioners, but it’s more common than you think. Now, considering the detrimental effects of these microscopic spores on your health, it is important to take care of the mold situation quickly. Unfortunately, that’s easier said than done. Why? Because the spores travel to other parts of your home and set up colonies wherever food and moisture are available. So, although it is impossible to eradicate mold, preventive measures help avoid mold growth on your AC in the first place.

  1. Keep Your AC Running

One of the three key ingredients for mold growth is moisture. So, it’s no surprise the spores seek out dark and damp spaces in your home. By removing the excess moisture from your home, you can stave off mold development. And that is precisely what air conditioners do. But running your AC the whole day is just not feasible unless you’re okay paying sky-high utility bills.

Thankfully, most AC models nowadays include an ‘auto’ feature that facilitates air flow without active cooling. This is useful, especially during the summer months, when the lack of circulation builds moisture in the air. Not only do you cut down on your electricity consumption, but the air inside your house cycles continuously even when you’re not home.

  1. Clean the Air Intakes

Air intakes provide a pathway for debris and microbes to enter your AC, which mold feed off and grow. So, you should inspect the air intakes and the surroundings for signs of organic compounds, like trash, bird droppings, standing water, disturbed earth, and dirt. Get rid of the microbes from the air intakes by cleaning or removing the sources of contamination.

  1. Get New Filters For Your System

How often do you replace the filters in your AC? The older and dirtier your filters are, the less their efficiency. Plus, they allow mold particles to spread within the system and grow colonies. The worst part is, the spores can escape the filter and spread throughout your home. Ideally, you should replace the filters at least once in a month. Make sure the filters fit properly inside the unit without leaving any gaps. Also, the technician should install the proper type of filter in the AC.

  1. Promote Ventilation and Airflow

Mold thrives when the air inside your home is stale. That’s why it is important to ensure that each crevice or corner in your office and home has suitable ventilation and airflow. Leave a lot of space between the furniture in your home, run exhaust fans inside your kitchen, and clean out your laundry and bathrooms. This will help you avoid the growth of mold on your air conditioner.

  1. Keep Your Drain Pans Clean

The drain pans in your AC must be kept clean and well-maintained at all times. Dirt or poor drainage creates ideal conditions for mold growth. You need to ensure the drain pans are positioned carefully inside the unit. Frequent inspection is a must to avoid the build-up of debris or water in the drain pans.

There is no surefire way to remove mold from your AC. Perform AC preventive maintenance service in Tampa and other hot, humid locations to keep mold at bay. Controlling the growth lets you safeguard your family’s comfort and health over time.

 

Share

Advertisement
Advertisement